 |
 |
 |
|
The Pro Bath Chair Lift is the bathing solution we have all been waiting for! Finally there is a portable bath lift that can lift a user from outside the tub, and lower them inside the tub with the push of a button. This easy-to-use bath lift chair is ADA compliant, has a soft-cover safety bar, and features a solid mast that connects the base of the tub and the ceiling.
The Pro Bath Chair Lift can be mounted for either left- or right-hand tubs. What makes this bath chair lift unique is its ability to lift the user from the ground if needed, accommodating a wide variety of user needs.
Installation of the Pro Bath Chair Lift requires no structural or plumbing changes.
Installation is a straight forward; using a level to ensure the chair lift is straight and then mounted with just four bolts being screwed into the ceiling and four bolts into the floor. Full details on installing the Pro Bath Chair Lift can be found in our Pro Bath Chair Lift Set Up Guide. View Pro Chair Lift Set Up Guide.
The Pro Bath Chair Lift offers a choice of the standard seat or the Peri-Care chair, which features a cut out bottom for ease in personal cleaning at no additional cost. This bath lift also comes with a spare 18 volt DC battery, so you’ll never have to wait to take a soak in the tub. The lift’s mast can be extended up to 10’ for higher ceilings if needed.
The Pro Bath Chair Lift battery system does not have the
feature built into the hand control to not lower the user in all
the way to the bottom of the tub once it gets too low. The
battery does have an indicator button on it that shows how much
battery life is left. The battery has been tested, and in
perfect conditions, have gotten about 18 lifts out of a fresh
battery. Users that are worried about battery life can always switch to a fresh battery every time they use the lift, since two batteries are sent with the chair, and one battery can be in
the charger at all times!
Only five measurements are needed for the Pro Bath Chair Lift: The width of the bottom of the tub (18" minimum), the thickness of the tub wall (both top and bottom measurements), the floor-to-ceiling height, and the height of the tub from the bathroom floor. Click here to view the measurement guide form that will make it simple to collect the measurements.
The Pro Bath Chair Lift is customized to work in the bathtub/room based on the measurements provided by the customer. The Pro Bath Chair Lift can lift the user 36 inches off the floor (and higher if needed). Depending on the tubs thickness, a Special Order Arm may be needed.
Please call one of our bath lift experts to discuss the Pro Bath Chair Lift. This product does ship internationally - please call for details.
** The Pro Bath Chair Lift is nonreturnable.
- Lifting Range: 0 - 36 inches
- Battery: 18V DVC
- Weight Capacity: 350 lbs
- Fits ceiling heights 88 - 96 inches (optional height extender available for ceiling up to 120 inches)
- Seat Width: 15.75 inches
- Seat Depth: 15.5 inches
- Backrest Width: 15 inches
- Backrest Height: 15 inches
- Weight: 105 lbs (Shipping Weight 105 lbs)
- Reclines: No
- Power Source: 18 Volt DC Craftsman Battery - UL Approved System
Warranty Information for the Pro Bath Chair Lift
The Pro Bath Chair Lift has a Lifetime Limited Warranty on frames, not including the powder coat finish. Manufacturer also warrants to the original end user that all non-frame components when properly installed in accordance with assembly and installation instructions, and properly used and maintained, shall be free from defects in material and workmanship for a period of five (5) years from the original date of purchase, provided that the manufacturer receives prompt notice in writing of any defect or failure and satisfactory proof thereof, with the following exceptions:
Exception: All electrical components, including the linear actuator shall have the following warranty period:
Year 1: 100% Coverage
Year 2: 60% Coverage (Customer is responsible for 40% of replacement cost)
Year 3: 50% Coverage (Customer is responsible for 50% of replacement cost)
Year 4: 40% Coverage (Customer is responsible for 60% of replacement cost)
This warranty specifically excludes reimbursement for labor to remove, repair or install the product and any return freight charges. These warranties do not cover any damage due to accident, misuse, abuse, negligence or failure to properly maintain any products, or normal wear and tear from day to day operations. In the event that any products are altered, repaired or improperly installed or improperly used by anyone without prior written approval by the manufacturer, all warranties are void.
IMPORTANT: Amount of weight placed on lift shall not exceed the rated lifting capacity of 350 pounds for the Pro Bath Chair Lift.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Lift user from outside the tub
- Fits ceiling heights 88 - 96 inches
- Easy to use hand control
- Two 18V batteries included
- No plumbing or structural changes
- More affordable than a walk-in tub
- In or out in 1 minute
- No waiting on warm water or draining
- Shower or bathe by adjusting seat height
|
|
|
|
|
|
| Accessories and replacement parts for this product... |
|
|
|
|
works perfectly 
